The SmallRig Field Monitor Mount Holder review is aimed at camera operators who want a compact way to position a 5- or 7-inch monitor on a cage or handle.
Its cold shoe base, adjustable tilt and swivel, and locating features are useful when you need a monitor angle that can be changed without adding a long articulated arm.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera rigs using 5- or 7-inch displays, especially when adjustable positioning and a cold shoe connection matter.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle through a cold shoe.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top and a silicone pad are designed to help secure compatible monitors and limit surface scratching or twisting.
Pros
- A quick-to-adjust thumbscrew controls tilt without requiring an Allen wrench for that adjustment.
- Combines cold shoe and threaded mounting options in a small, lightweight holder.
Consider before buying
- The listed load limit changes with tilt angle, so a monitor suitable at one position may exceed the guidance at another.
- Swivel tension requires the included Allen wrench, adding a tool step when making that adjustment.
Read the full review summary
This mount combines a cold shoe connection with a top 1/4-inch screw, a separate 1/4-inch threaded hole for an arm or stabilizer, and adjustments for both tilt and swivel.
The upgraded tilt control uses a thumbscrew, while swivel tension is adjusted with the included Allen wrench. Built-in locating pins and a silicone pad are intended to help secure compatible monitors and protect their contact surface.
It is best suited to a compact camera rig where a monitor needs to sit close to the cage or handle and be repositioned during setup.
The stated load limits vary with tilt angle, so buyers should match the monitor’s weight and chosen position to those limits and retighten the knurled screw as directed.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Monitor fit
Designed for 5- and 7-inch camera monitors, a practical range for many on-camera setups.
Angle adjustment
Offers up to 180-degree tilt and 360-degree swivel, with separate tension controls.
Mounting flexibility
The cold shoe base and 1/4-inch threaded hole support more than one rig connection.
Monitor retention features
Locating pins and a silicone pad are useful design details for compatible monitors.
Load guidance
Provides angle-specific limits, but buyers need to account for the selected tilt when positioning a monitor.
Compact carry
At 76 g with a listed folded size of 78 by 67 by 42 mm, it adds little bulk to a kit.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle through a cold shoe.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top and a silicone pad are designed to help secure compatible monitors and limit surface scratching or twisting.
- Includes a cold shoe adapter at the bottom and a 1/4-inch-20 threaded hole for connection to a magic arm or stabilizer.
- The top 1/4-inch-20 screw can support a monitor, microphone, or light.
- Listed load capacities depend on tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees. The 76 g mount has a listed folded size of 78 by 67 by 42 mm.
Pros and Cons of SmallRig Monitor Mount
Pros
- A quick-to-adjust thumbscrew controls tilt without requiring an Allen wrench for that adjustment.
- Combines cold shoe and threaded mounting options in a small, lightweight holder.
- Locating pins and a silicone pad add retention and contact protection for compatible monitors.
- The angle-specific load guidance helps buyers evaluate their monitor and setup.
Consider before buying
- The listed load limit changes with tilt angle, so a monitor suitable at one position may exceed the guidance at another.
- Swivel tension requires the included Allen wrench, adding a tool step when making that adjustment.
- The mount attaches close to a cage or handle; buyers who need a monitor positioned farther away should check whether their rig needs an additional arm.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this mount if your camera cage or handle has a cold shoe and you want a compact holder for a 5- or 7-inch monitor.
The combination of substantial tilt and full swivel gives flexibility to set viewing angles, while the thumb-adjusted tilt tension can make routine positioning more direct.
It is also worth considering if your monitor benefits from the locating pins and silicone contact pad.
Before buying, check how your monitor attaches, whether the cold shoe is accessible, and whether the monitor’s weight fits the stated limit at the tilt angle you plan to use.
Retighten the knurled screw with the Allen wrench for added security, as directed.
Who should skip it
Look elsewhere if your setup needs a long reach between the camera and monitor; this holder is designed for mounting on a cage or handle, and an additional arm may be needed to create distance.
Skip it if your monitor and chosen angle fall outside the applicable load guidance, or if you need to make swivel adjustments without using a tool.
SmallRig Monitor Mount: What the Design Means on a Camera Rig
Adjusting the viewing angle
The 180-degree tilt and 360-degree swivel let you orient a monitor for different camera positions.
Tilt tension is changed at the thumbscrew, while swivel tension uses the supplied Allen wrench, so frequent repositioning may involve two different adjustment methods.
Matching the mount to monitor weight
The listed capacity varies by tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
Use the limit corresponding to the intended angle and leave room for any attached accessories rather than assuming one capacity applies throughout the adjustment range.
Connection and monitor contact
The bottom cold shoe is intended for a cage or handle, and a threaded hole provides another connection route through a compatible arm or stabilizer.
At the top, the 1/4-inch screw, locating pins, and silicone pad combine a standard attachment point with features intended to help keep compatible monitors in place.
A small footprint for compact setups
At 76 g and a listed folded size of 78 by 67 by 42 mm, the mount is sized to add little bulk to a rig or kit.
Its compact form suits a monitor mounted close to the camera; check your preferred screen position before choosing it if you need more separation.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Camera Monitor Mount 6313
Choose the Field Monitor Mount Holder if its stated monitor range and angle-specific load guidance suit your setup.
Consider the 6313 if portrait mounting and a retractable locating screw are priorities; compare its mounting and weight requirements with your monitor before deciding.
- The 6313 offers 180-degree tilt and 360-degree pan, a retractable 1/4-inch locating screw, and a cold shoe bottom that locks in place.
- Its description also specifies horizontal and vertical monitor installation and thumb-adjustable tilt damping.
- The Field Monitor Mount Holder supports 5- and 7-inch monitors, uses a cold shoe base, and includes a 1/4-inch threaded hole for a magic arm or stabilizer.
- Its tilt capacity varies by angle.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Universal Magic Arm with Small Ballhead 2158
Choose the Field Monitor Mount Holder for its cold shoe connection and monitor-specific locating features.
Consider the 2158 when a small ballhead arm and a central wingnut better fit the way you want to position accessories, while keeping its stated weight limit in mind.
- The 2158 is a two-piece set with 1/4-inch screws at both ends and a central wingnut for positioning. Its stated maximum monitor or light weight is 1 kg.
- The Field Monitor Mount Holder is a compact mount with a cold shoe base and angle-adjustable monitor support, suited to attaching a screen close to a cage or handle.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact rig that needs adjustable support for a 5- or 7-inch monitor.
Its cold shoe and threaded connections, broad angle adjustment, and locating features make it a versatile fit for a cage or handle.
Check the angle-specific load limit against your monitor and intended position, and account for the Allen-wrench adjustment for swivel tension. If those constraints fit your setup, this is a practical, lightweight monitor mount.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera rigs using 5- or 7-inch displays, especially when adjustable positioning and a cold shoe connection matter.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle through a cold shoe.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top and a silicone pad are designed to help secure compatible monitors and limit surface scratching or twisting.