Product Reviews

SmallRig Cold Shoe Mount Review: A Simple Two-Pack for Camera Rigs

A practical fit for camera-rig builders who need compact cold shoe points for a microphone, flash, or LED accessory.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review is for camera-rig builders who want a straightforward way to add accessory attachment points to a cage, handle, or plate.

This two-piece aluminum set uses threaded mounting options and includes the screws and hex spanners needed for installation.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera-rig builders who need compact cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • Mounting options include a 1/4-inch-20 screw and M2.5 screws for compatible threaded holes.

Pros

  • Two mounts provide more than one potential accessory position.
  • Includes both 1/4-inch-20 and M2.5 fasteners for compatible rig surfaces.

Consider before buying

  • It is not suitable for DJI or Zhiyun gimbals.
  • Mounting depends on a compatible threaded hole or surface, so buyers should check their cage or rig before ordering.
Read the full review summary

The 2060 is a compact cold shoe adapter designed to add a place for a microphone, flash, or LED accessory on compatible camera hardware.

Each mount measures 25 × 25 mm and can be secured using a 1/4-inch-20 screw; M2.5 screws are also included for compatible threaded holes.

Its strongest appeal is practical flexibility: two mounts in the pack, multiple screw options, and arrows that help indicate installation direction. It suits users assembling or expanding a modular camera rig.

Check the mounting surface and accessory fit before buying, and note the stated incompatibility with DJI and Zhiyun gimbals.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The 1/4-inch-20 screw and included M2.5 screws support several compatible cage, handle, plate, or block setups.

8/10

Accessory usefulness

The cold shoe is intended for common rig accessories such as a microphone, flash, or LED.

8/10

Pack value

Two mounts and the required screws and hex spanners make the set useful for adding more than one attachment point.

7/10

Installation guidance

Surface arrows indicate mounting direction, and the two bevels are designed to help prevent accidental removal.

6/10

Rig compatibility clarity

The product supports common threaded mounting surfaces, but explicitly excludes DJI and Zhiyun gimbals and identifies an exception for one SmallRig cage.

8/10

Compactness

At 25 × 25 mm per mount, the parts occupy little space on a cage or plate.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold shoe mounts are included.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • Mounting options include a 1/4-inch-20 screw and M2.5 screws for compatible threaded holes.
  • The pack includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • Two white arrows indicate mounting direction; bevels at one end are designed to help prevent accidental removal.

Pros and Cons of SmallRig Shoe Mount

Pros

  • Two mounts provide more than one potential accessory position.
  • Includes both 1/4-inch-20 and M2.5 fasteners for compatible rig surfaces.
  • Compact dimensions make it easy to add a shoe point without a large mount.
  • Arrows and bevels offer practical installation and retention cues.

Consider before buying

  • It is not suitable for DJI or Zhiyun gimbals.
  • Mounting depends on a compatible threaded hole or surface, so buyers should check their cage or rig before ordering.
  • For most cages, the 1/4-inch-20 screw is the intended attachment; the product notes a specific exception for SmallRig Full Cage 1661, where M2.5 fastening is needed.

Who Should Buy SmallRig Shoe Mount?

Good fit

Consider this set if you are building a cage-based camera rig and want simple cold shoe positions for a microphone, flash, or LED.

The two-mount pack can help when you need to place more than one accessory, while the included fasteners cover the described 1/4-inch-20 and M2.5 mounting arrangements.

It is especially suitable for buyers who already know their cage, handle, or plate has a compatible threaded hole. Before choosing, confirm which screw pattern your mounting point uses and whether the accessory's foot fits the cold shoe.

Who should skip it

Skip this mount if your plan is to attach it to a DJI or Zhiyun gimbal; those uses are expressly excluded.

Also look elsewhere if your rig has no compatible threaded mounting point or you need an adjustable, tilting position for the accessory.

How the SmallRig Shoe Mount Fits a Modular Camera Rig

Threaded mounting options

A cold shoe is only useful when it can be fixed securely to the rig. This set includes 1/4-inch-20 and M2.5 fasteners, giving it options for compatible threaded surfaces on cages, handles, plates, and blocks.

The general instruction is to fasten most cages with the 1/4-inch-20 screw; SmallRig Full Cage 1661 is called out as an exception that uses the M2.5 threaded arrangement. Check the hardware and mounting point before installation.

Two accessory positions in a compact footprint

Each mount's 25 mm square footprint makes it a small addition to a cage or plate, and the two-pack supports adding separate shoe points where the rig layout allows. The intended accessories include a microphone, flash, or LED.

As with any cold shoe, confirm that the accessory's foot is compatible and that its position leaves room for controls, cables, and other gear.

Installation and retention cues

The white arrows are meant to show mounting direction, while the bevels on one end are designed to help prevent accidental removal.

These details can make orientation easier during setup, but buyers should still seat the accessory fully and check that the mount is secured to its threaded surface before use. The included hex spanners support tightening the supplied screws.

Check rig compatibility first

The product is described for camera accessories with compatible 1/4-inch or M2.5 threaded holes and gives several cage examples. It also explicitly says it is not suitable for DJI or Zhiyun gimbals.

If your setup uses a different mounting system, verify its thread and physical clearance rather than assuming the cold shoe itself will make the mount compatible.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 when you want two simple, fixed shoe positions on threaded rig hardware.

The 1135 is the more relevant choice when angle adjustment is central to the setup and its single articulated mount and weight guidance fit the accessory.

  • The 1135 combines a cold shoe and 1/4-inch screw with a double ball head that rotates up to 180 degrees and locks with a side wingnut.
  • Its stated maximum weight recommendation is 1 kg, and the product advises against monitors or LED lights over that amount.
  • The 2060 is a fixed cold shoe mount that attaches through compatible threaded points and comes as a two-pack.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Mount 3577

The 2060 is a better fit for buyers who need two fixed shoe points and already have threaded mounting holes.

Consider the 3577 for a single lightweight accessory when tilt adjustment, a 1/4-inch top screw, and its stated 250 g limit align with your setup.

  • The 3577 is a mini ball head mount with a 1/4-inch screw on top and a cold shoe adapter at the base.
  • It tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g; its base is described for toolless attachment to a camera or cage.
  • The 2060 supplies two compact cold shoe mounts with multiple screw options for compatible threaded rig surfaces.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a modular camera rig that needs compact, fixed accessory points.

Its two-mount pack, included screws, and installation cues make it a practical option when the cage or plate has the matching threaded holes.

Check the mounting pattern and accessory fit before buying, and avoid it for DJI or Zhiyun gimbals. If you need an adjustable angle, a ball-head style mount may suit your rig better.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera-rig builders who need compact cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • Mounting options include a 1/4-inch-20 screw and M2.5 screws for compatible threaded holes.

Written by

utopiaindc.com Editorial Team

Editorial team

utopiaindc.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical fit for camera-rig builders who need compact cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
Check Video Reviews on Amazon